不锈钢配电箱安装问题：
1, not according to the requirements of the drawings or inappropriate selection. As is well known, there are no certain problems in accordance with the rules, how can the stainless steel distribution box exception? You said that, in the choice of stainless steel distribution box, must be in accordance with the requirements to do, otherwise the problem will be.
1，不按图纸要求或不恰当的选择。众所周知，没有一定的问题，按照规则，如何能在不锈钢配电箱的例外？你说，在不锈钢配电箱的选择，必须按照要求去做，否则问题将。
2, stainless steel distribution box body skin is too thin, stiffness, resulting in serious deformation of the shell and facade, close the gap is too large. Such a situation can be very large, mainly because of the stainless steel distribution box application thickness does not meet the requirements, this we need to pay attention, choice, thickness of box application with in compliance with the requirements.
2，不锈钢配电箱体的皮肤太薄，刚度，导致外壳和门面严重变形，关闭间隙太大。这种情况可能会非常大，主要是因为不锈钢配电箱应用厚度不满足要求，这需要我们注意的是，选择，以符合客户要求的盒应用厚度。
3, some of the electrical appliances in the box, the specifications do not meet the design requirements.
3，一些盒子里的电器，规格不符合设计要求。
4, there is no grounding and the zero bus line, or connected to the zero bus size is small, can not meet the use requirements.
4，没有接地和零线，或接零母线尺寸小，不能满足使用要求。
5, some power distribution box without isolation and protection, part of the protection board is not equipped with insulation or hard combustible material.
5，一些配电箱无隔离和保护，该保护板部分没有配备绝缘或难燃材料。
以上资讯由上海金勒电气成套有限公司，欢迎广大新老顾客前来选购！
